Troubleshooting Canon PIXMA MP287 Jam Paper

Troubleshooting Canon PIXMA MP287 Jam Paper

Troubleshooting Canon PIXMA MP287 Jam Paper - Which is often problematic on a Canon Pixma MP287 Printer is a problem you can not pull the paper up to par, so to speak is very sensitive Printer with paper that is not neat, causing jams. On this occasion I will share a few thoughts with the Canon Pixma MP287 printer problems jammed paper.

Troubleshooting Canon PIXMA MP287 Jam Paper

Each MP287 Printer error occurs on an alert appears on the printer's LCD display, I experienced this time was a mistake E-0-3, where the warning is not normal paper discusses or front cover unopened.

Troubleshooting Canon PIXMA MP287 Jam Paper

Most of these printers have failed to load paper, because no object lodged at the entry point of paper to print, my experience, if the printer is clean without any objects involved, chances are there's a problem on the sensor puller paper or wheel sensors on the printer mentioned.

Troubleshooting Canon PIXMA MP287 Jam Paper

So the solution is replace it with a new sensor, make sure the sensor is attached to a neat, note the code or number on the LCD shows the number 1, where the number 1 is the Printer in the normal position and ready for use, so many of my good luck.

Troubleshooting Canon PIXMA MP287 Jam Paper 2016-07-21T08:03:00+07:00 Rating: 4.5 Diposkan Oleh: trikprinter